250SE Auto transmission linkages part 2

After using yet another bulldog clip to temporarily move the car, I went to look in my parts cupboard and found that I had two of the upper bushings from my old 250SE Coupe that came with some parts.

20140502_191340They looked like the right part and had a 112 part number, so seemed correct.   Like the lower one, it was quite an easy fitting.

20140502_193112It is also important to re-connect the neutral safety switch.   All seemed fine, but after a test drive, the lower end of the linkage fell off again.   I put it back on, so either:

  1. I loosened it putting the upper bushing on
  2. I have used the wrong bushing
  3. I have fitted it incorrectly

I will need to try again and see what happens.

 

1 comment to 250SE Auto transmission linkages part 2

Leave a Reply

You can use these HTML tags

<a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>