<?xml version="1.0" encoding="UTF-8"?><rss version="2.0"
	xmlns:media="http://search.yahoo.com/mrss/"
	xmlns:content="http://purl.org/rss/1.0/modules/content/"
	xmlns:wfw="http://wellformedweb.org/CommentAPI/"
	xmlns:dc="http://purl.org/dc/elements/1.1/"
	xmlns:atom="http://www.w3.org/2005/Atom"
	xmlns:sy="http://purl.org/rss/1.0/modules/syndication/"
	xmlns:slash="http://purl.org/rss/1.0/modules/slash/"
	>

<channel>
	<title>Window regulator Archives &#171; Classic Jalopy</title>
	<atom:link href="https://www.classicjalopy.com/tag/window-regulator/feed/" rel="self" type="application/rss+xml" />
	<link>https://www.classicjalopy.com/tag/window-regulator/</link>
	<description>A website that tells the story of keeping up 5-6 European classics:  Mercedes; Jaguar; Daimler; Citroen; Rover and others.</description>
	<lastBuildDate>Mon, 17 Aug 2026 11:01:07 +0000</lastBuildDate>
	<language>en-US</language>
	<sy:updatePeriod>
	hourly	</sy:updatePeriod>
	<sy:updateFrequency>
	1	</sy:updateFrequency>
	<generator>https://wordpress.org/?v=7.1.4</generator>
	<item>
		<title>W124 rear window regulator</title>
		<link>https://www.classicjalopy.com/2026/08/w124-rear-window-regulator/?utm_source=rss&#038;utm_medium=rss&#038;utm_campaign=w124-rear-window-regulator</link>
					<comments>https://www.classicjalopy.com/2026/08/w124-rear-window-regulator/#respond</comments>
		
		<dc:creator><![CDATA[admin]]></dc:creator>
		<pubDate>Mon, 17 Aug 2026 10:37:11 +0000</pubDate>
				<category><![CDATA[Mercedes]]></category>
		<category><![CDATA[1990 300TE]]></category>
		<category><![CDATA[Vaico]]></category>
		<category><![CDATA[Window regulator]]></category>
		<guid isPermaLink="false">https://www.classicjalopy.com/?p=8623</guid>

					<description><![CDATA[<p>A week or so ago I was returning from a family event in my 300TE.  My son in the middle seat in the rear and my two daughters on either side.  Out of nowhere, the dulcet tones from the Becker radio were interrupted by flatulence so powerful it could have been measured on the Richter scale. The source quickly revealed itself when my two&#46;&#46;&#46;</p>
<p>The post <a href="https://www.classicjalopy.com/2026/08/w124-rear-window-regulator/">W124 rear window regulator</a> appeared first on <a href="https://www.classicjalopy.com">Classic Jalopy</a>.</p>
]]></description>
										<content:encoded><![CDATA[<p>A week or so ago I was returning from a family event in my 300TE.  My son in the middle seat in the rear and my two daughters on either side.  Out of nowhere, the dulcet tones from the Becker radio were interrupted by flatulence so powerful it could have been measured on the Richter scale.</p>
<p>The source quickly revealed itself when my two daughter started gasping for air, desperate to escape the noxious cloud that now enveloped them.   Like a safety alarm, they reached for the only things that could save them, the window switches.  The passengers side rear window slid down easily, and that side of the car was bathed in sweet carbon monoxide fumes from the M4.  On the drivers side, a loud crack emanated from the window mechanism when the window was only down 5cm.  There the window stubbornly remained while my younger daughter lamented on her certain death.</p>
<p>Yet by providence, her life was somehow spared, and when the fumes eventually cleared we were able to return home and live to tell the tale.</p>
<p>With all three children still alive, only then did my thoughts turn to repairing the 300TE.  I was surprised by the noise the window made.  I&#8217;ve dealt with window regulators in old Mercedes before, but not with a failure that sounded like that.</p>
<p>Doing more research, it became apparent that the rear doors on a 124 use a cable operated window regular rather than a sliding jaw type.  The crack was clearly the cable letting go.  I ordered a new one from Spareto, a Vaico unit.   There were a couple on eBay a bit cheaper from brands I had never heard of.  Even better news was that wagons used sedan regulators.</p>
<p>The instructions from the workshop manual were fairly straightforward.  The hardest past was the trim around the door handle.  The way it moves forward is not all that well described.  In general I don&#8217;t think the door trim is as good quality as earlier Mercedes.  It seems to be made from some kind of material that is a hybrid of wood and cardboard?  It lifts up to come out, like traditional Mercedes trims, but the &#8216;hooks&#8217; are mostly glued on.  Most of mine had already come off.  It looked like the trim had been off before, as there was hardly any moisture barrier.</p>
<p><a title="2026-08-11 14-08-04" href="https://www.flickr.com/photos/classicjalopy/55469282049/in/dateposted-public/" data-flickr-embed="true"><img fetchpriority="high" decoding="async" class="aligncenter" src="https://live.staticflickr.com/65535/55469282049_d388db8df0_b.jpg" alt="2026-08-11 14-08-04" width="1024" height="768" /></a></p>
<p>Getting the old Regulator out was fairly straightforward.  Two bolts for the regulator, one top and one bottom. Three nuts for the motor.  The manual seems to say you need to remove the slider thing that holds the window to the regulator before removing the regulator.  I found that only possible with the regulator unbolted.</p>
<p><a title="W124 rear window regulator" href="https://www.flickr.com/photos/classicjalopy/55469505775/in/dateposted-public/" data-flickr-embed="true"><img decoding="async" class="aligncenter" src="https://live.staticflickr.com/65535/55469505775_32030968ab_b.jpg" alt="W124 rear window regulator" width="1024" height="768" /></a></p>
<p>Unlike the older type window regulators I am used to, this new one came with a motor.  I don&#8217;t know if the one I had removed was original or not, but if was certainly a proper Mercedes-Benz part.</p>
<p><a title="W124 rear window regulator" href="https://www.flickr.com/photos/classicjalopy/55469110981/in/dateposted-public/" data-flickr-embed="true"><img decoding="async" class="aligncenter" src="https://live.staticflickr.com/65535/55469110981_1b0201bcaa_b.jpg" alt="W124 rear window regulator" width="1024" height="768" /></a></p>
<p>With the old regulator out, I found that the cable hadn&#8217;t snapped, it had managed to work its way out of the runner.  Not sure if it is repairable or not, but I didn&#8217;t try. I just fitted my new one.</p>
<p>The new one went in pretty easily.  The Vaico regulator used different wire colours.  Blue seems to go with green, and red with black.</p>
<p>With the new regulator fitted and working, I then glued the hooks back onto the door trim.  I let it sit to dry, and I will also make up a new moisture barrier before I re-install it.</p>
<p><a title="2026-08-11 15-48-44" href="https://www.flickr.com/photos/classicjalopy/55468129232/in/dateposted-public/" data-flickr-embed="true"><img loading="lazy" decoding="async" class="aligncenter" src="https://live.staticflickr.com/65535/55468129232_ff94110a5d_b.jpg" alt="2026-08-11 15-48-44" width="1024" height="768" /></a></p>
<p>The post <a href="https://www.classicjalopy.com/2026/08/w124-rear-window-regulator/">W124 rear window regulator</a> appeared first on <a href="https://www.classicjalopy.com">Classic Jalopy</a>.</p>
]]></content:encoded>
					
					<wfw:commentRss>https://www.classicjalopy.com/2026/08/w124-rear-window-regulator/feed/</wfw:commentRss>
			<slash:comments>0</slash:comments>
		
		
		<media:content url="https://live.staticflickr.com/65535/55469505775_32030968ab_b.jpg" medium="image"></media:content>
	</item>
		<item>
		<title>W126 front window regulator</title>
		<link>https://www.classicjalopy.com/2021/06/w126-front-window-regulator/?utm_source=rss&#038;utm_medium=rss&#038;utm_campaign=w126-front-window-regulator</link>
					<comments>https://www.classicjalopy.com/2021/06/w126-front-window-regulator/#comments</comments>
		
		<dc:creator><![CDATA[admin]]></dc:creator>
		<pubDate>Wed, 30 Jun 2021 09:29:05 +0000</pubDate>
				<category><![CDATA[Mercedes]]></category>
		<category><![CDATA[1986 300SE]]></category>
		<category><![CDATA[Door card]]></category>
		<category><![CDATA[Window regulator]]></category>
		<guid isPermaLink="false">https://www.classicjalopy.com/?p=4914</guid>

					<description><![CDATA[<p>Back a few weeks ago I identified the problems with my power window was the W126 front window regulator.   In particular, the passengers side front.   The regulator was missing some teeth.  I had bought a new one some weeks ago, but the regulator was in the shipment that FedEx lost.    I went with a VDO regulator as I expected it to be higher&#46;&#46;&#46;</p>
<p>The post <a href="https://www.classicjalopy.com/2021/06/w126-front-window-regulator/">W126 front window regulator</a> appeared first on <a href="https://www.classicjalopy.com">Classic Jalopy</a>.</p>
]]></description>
										<content:encoded><![CDATA[<p>Back a few weeks ago I <a href="https://www.classicjalopy.com/2021/04/bad-w126-window-regulator/">identified the problems</a> with my power window was the W126 front window regulator.   In particular, the passengers side front.   The regulator was missing some teeth.  I had bought a new one some weeks ago, but the regulator was in the shipment that FedEx lost.    I went with a VDO regulator as I expected it to be higher quality than a Meyle unit.</p>
<p>Due to the lost parcel, I had been driving around with the door card removed for weeks.   I was rather pleased to see the box arrive yesterday.   The new regulator looked identical to the old one.</p>
<p><a title="W126 front window regulator" href="https://www.flickr.com/photos/classicjalopy/51281467045/in/photostream/" data-flickr-embed="true"><img loading="lazy" decoding="async" class="aligncenter" src="https://live.staticflickr.com/65535/51281467045_6ee11944ca_b.jpg" alt="W126 front window regulator" width="1024" height="768" /></a></p>
<p>I wasn&#8217;t looking forward to this job.  I expected it to be quite time consuming.   In the end, I was pleasantly surprised.   The workshop manual had a good step by step guide to removing the old regulator.   I had it out in a few minutes.   The most difficult part was removing the slide from the window channel.</p>
<p>Once I had removed the old W126 front window regulator, the next step was swapping the motor.   I carefully cleaned up the old hardened grease as best I could.   There is a metal plate that bolts on to hold the motor to the teeth and I gave this bit a good clean in brake cleaner.   I didn&#8217;t want to use that so close to the motor so I used rags for the motor and the window channel.</p>
<p><a title="W126 front window regulator" href="https://www.flickr.com/photos/classicjalopy/51279703147/" data-flickr-embed="true"><img loading="lazy" decoding="async" class="aligncenter" src="https://live.staticflickr.com/65535/51279703147_1080289018_b.jpg" alt="W126 front window regulator" width="1024" height="768" /></a></p>
<p>The new regulator came with two plastic spacers that were not present on my old one.   I used them on the two bolts next to the teeth.   That seemed the most reasonable place, although they were not mentioned in the workshop manual.   I&#8217;m not sure if this is right.</p>
<p>I put plenty of new grease on the moving parts of the new regulator.   Getting it back in was also quite easy.   The instructions had the usual (and useless) comment that installation is the reverse of the removal.   I found that the easiest way to do it was to first put the slide on the window channel (with new grease), then the bolt to the other side of the window, then the regulator to the door, then the other slide to the door.   While I still had access to the inside of the door I sprayed it with fish oil.</p>
<p>The most tedious part of the job was getting the door card on properly without breaking all the tabs.   The moisture barrier on my car was completely shredded, so I made a new one of out builders film.   It worked reasonably well.  I first cut a rough shape and then taped it to the door.  I then used a sharpie to work out where I needed to trim and some adhesive to stick it to the door.</p>
<p><a title="Builders film" href="https://www.flickr.com/photos/classicjalopy/51279703122/" data-flickr-embed="true"><img loading="lazy" decoding="async" class="aligncenter" src="https://live.staticflickr.com/65535/51279703122_61ef7567cd_b.jpg" alt="Builders film" width="1024" height="768" /></a>Getting all the hooks into the door at the same time took me ages.   I hadn&#8217;t removed the upper window trim, so I found it easier to get the first tab on the left started away from the window trim then slide it across.   The bottom tab was also a pain.   The wiring for the light then needs to be pushed into a little hole which leads to the cavity where the light is.   I found the only way to do that was lying down under the door.   I also used a pick tool to get the door lock button through its little hole.</p>
<p><a title="door card done" href="https://www.flickr.com/photos/classicjalopy/51279702927/" data-flickr-embed="true"><img loading="lazy" decoding="async" class="aligncenter" src="https://live.staticflickr.com/65535/51279702927_0789389697_b.jpg" alt="door card done" width="1024" height="768" /></a></p>
<p>All this trim is now very brittle after 30+ years.  I managed not to break any of the door trim but the tab to hold in the lower light snapped off.   I&#8217;ll have to see if that light is still available.   After replacing the W126 front window regulator I now have a properly working front passengers window.   There is also a strip of glass I have never seen now it rises to the top.</p>
<p>The post <a href="https://www.classicjalopy.com/2021/06/w126-front-window-regulator/">W126 front window regulator</a> appeared first on <a href="https://www.classicjalopy.com">Classic Jalopy</a>.</p>
]]></content:encoded>
					
					<wfw:commentRss>https://www.classicjalopy.com/2021/06/w126-front-window-regulator/feed/</wfw:commentRss>
			<slash:comments>1</slash:comments>
		
		
		<media:content url="https://live.staticflickr.com/65535/51281467045_6ee11944ca_b.jpg" medium="image"></media:content>
	</item>
		<item>
		<title>Bad W126 window regulator</title>
		<link>https://www.classicjalopy.com/2021/04/bad-w126-window-regulator/?utm_source=rss&#038;utm_medium=rss&#038;utm_campaign=bad-w126-window-regulator</link>
					<comments>https://www.classicjalopy.com/2021/04/bad-w126-window-regulator/#comments</comments>
		
		<dc:creator><![CDATA[admin]]></dc:creator>
		<pubDate>Thu, 08 Apr 2021 07:06:51 +0000</pubDate>
				<category><![CDATA[Mercedes]]></category>
		<category><![CDATA[1986 300SE]]></category>
		<category><![CDATA[Door card]]></category>
		<category><![CDATA[Window regulator]]></category>
		<guid isPermaLink="false">https://www.classicjalopy.com/?p=4837</guid>

					<description><![CDATA[<p>Another long standing to-do list item on my 300SE was the passengers side window.   Over time, the window would slip down so there was half a centimeter gap at the top.   It would also make a clunking sound at the top of the window travel. I had purchased a good used W126 window regulator a couple of years back.   Yesterday I decided to try&#46;&#46;&#46;</p>
<p>The post <a href="https://www.classicjalopy.com/2021/04/bad-w126-window-regulator/">Bad W126 window regulator</a> appeared first on <a href="https://www.classicjalopy.com">Classic Jalopy</a>.</p>
]]></description>
										<content:encoded><![CDATA[<p>Another long standing to-do list item on my 300SE was the passengers side window.   Over time, the window would slip down so there was half a centimeter gap at the top.   It would also make a clunking sound at the top of the window travel.</p>
<p>I had purchased a good used W126 window regulator a couple of years back.   Yesterday I decided to try and fit the regulator.   To get to the W126 window regulator, the door card must be removed.     To do so, there a few screws holding it in place.    Two holding the little chrome embellisher near the door striker,  one behind the plastic backing for the door pull and three for the arm-rest.     Once the screws are out, the door card lifts up and out.   Many of these are damaged when people attempt to just pull it outwards.</p>
<p>Behind the door card is a moisture barrier.   Mine was in a sorry state.</p>
<p><a title="W126 window regulator" href="https://www.flickr.com/photos/classicjalopy/51100129292/in/dateposted-public/" data-flickr-embed="true"><img loading="lazy" decoding="async" class="aligncenter" src="https://live.staticflickr.com/65535/51100129292_636cf973b8_b.jpg" alt="W126 window regulator" width="1024" height="1024" /></a></p>
<p>I will replace this after I get the window regulator working properly. Next step was to check why the regulator wasn&#8217;t working properly. A quick test confirmed the behavior I had seen.</p>
<div class="video-container"><iframe loading="lazy" title="Bad W126 window regulator" width="500" height="281" src="https://www.youtube.com/embed/8VKIB773W4M?feature=oembed&#038;wmode=opaque" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" referrerpolicy="strict-origin-when-cross-origin" allowfullscreen></iframe></div>
<p>When I took a closer look at the mechanism, it was pretty clear why the motor was jumping like that.   The regulator was missing multiple teeth.</p>
<p><a title="W126 window regualtor" href="https://www.flickr.com/photos/classicjalopy/51100033676/in/dateposted-public/" data-flickr-embed="true"><img loading="lazy" decoding="async" class="aligncenter" src="https://live.staticflickr.com/65535/51100033676_e9e67c5f46_b.jpg" alt="W126 window regulator" width="1024" height="768" /></a>I wasn&#8217;t able to replace the regulator as the used unit I had was quite different to what was installed in the car.   Doing further research, it turns out it is for a coupe.    This isn&#8217;t so bad as having a coupe spare is quite useful as they are now hard to come by.</p>
<p>Looking at the parts catalog there are two regulator types possible for my car.   The first type was made by Brose and has part number 126 720 13 46.   I have this type on my car.   The second was made by Reitter &amp; Schefenacker and has part number 126 720 17 46.   I understand the main difference is the number of teeth on the motor.   Therefore the difference doesn&#8217;t matter if you&#8217;re going to swap the regulator and motor as a unit.</p>
<p>While I was doing this job I noticed another wiring harness in the door.   It even had the little Mercedes-Benz pin connectors, so it was unlikely to be aftermarket.   Most aftermarket radios and alarms I have found in these cars were quite sloppily installed with the wires just twisted together.</p>
<p>I started a thread on the ozBenz forum and it turns out that it is likely from option code 551, which was the anti-theft system.   An unusual option for a low spec 300SE like this one.</p>
<p><a title="Anti-Theft" href="https://www.flickr.com/photos/classicjalopy/51100034386/in/album-72157679069100026/" data-flickr-embed="true"><img loading="lazy" decoding="async" class="aligncenter" src="https://live.staticflickr.com/65535/51100034386_6bee76779e_b.jpg" alt="Anti-theft" width="768" height="1024" /></a>I&#8217;ll leave the door card off while I source the new regulator.   It sure makes a difference to road noise though.</p>
<p>The post <a href="https://www.classicjalopy.com/2021/04/bad-w126-window-regulator/">Bad W126 window regulator</a> appeared first on <a href="https://www.classicjalopy.com">Classic Jalopy</a>.</p>
]]></content:encoded>
					
					<wfw:commentRss>https://www.classicjalopy.com/2021/04/bad-w126-window-regulator/feed/</wfw:commentRss>
			<slash:comments>1</slash:comments>
		
		
		<media:content url="https://live.staticflickr.com/65535/51100129292_636cf973b8_b.jpg" medium="image"></media:content>
	</item>
	</channel>
</rss>

<!--
Performance optimized by W3 Total Cache. Learn more: https://www.boldgrid.com/w3-total-cache/?utm_source=w3tc&utm_medium=footer_comment&utm_campaign=free_plugin

Object Caching 52/72 objects using Memcache
Page Caching using Disk: Enhanced 
Content Delivery Network via www-classicjalopy-com.b-cdn.net
Lazy Loading (feed)
Minified using Disk
Database Caching 54/68 queries in 0.020 seconds using Memcache

Served from: www.classicjalopy.com @ 2026-11-17 03:14:25 by W3 Total Cache
-->