After my Citroen DS was painted, there were a couple of cosmetic things wrong with the car that were far more noticeable. One of them was the DS window rubbers and felts. The previous owner had used generic units, and they didn’t fit all that well. Proper reproduction units are available, which are the right size and use the standard mounting points. I...
I changed the differential ratio of my E-Type about two years ago. My car was first delivered in the USA, so it came standard with 3.54 ratio. Most of the 4.2 cars were standard with 3.07. When the car was restored in the 90’s, it was converted to 3.07. However, the previous owner converted it back to 3.54. My conversion put...
After using blank plates as a way of attaching NSW Historic Plates on the 450SLC and the 560SEC, the adapter I fabricated for the 250SE was looking rather shoddy. I made it myself out of aluminium. I used thin aluminium to make it easier to cut. The thin aluminium bent easily and now had creases. I liked how using the blank German plate filled...
For the last couple of years I have noticed a noise from the rear of the 450SLC while driving. At first I thought it might be a wheel bearing or some kind of bushing. I mentioned it to my mechanic and he took and look and it wasn’t any of those things. Last time I took the car on a longer drive, the noise...
The MBCNSW held a tech day at a dyno equipped performance shop today. I was keen to attend as I wanted to understand how much power my ECE 560SEC is making. Geting dyno time independently can be expensive, but through the club day it was very affordable. The tech day was held at SR Performance at Wolli Creek. On the Dyno, the following cars...
I’ve had two BMW E39 front seats in the garage for a couple of years. My brother wrote off his 1999 BMW 523i a couple of years back. He was originally going to do something with the seats, but since moved interstate. I’ve always thought that one of them would make a great garage chair. The main downside is they are immensely heavy. ...
A couple of weeks ago I installed the Classic Auto Sound Becker Tribute Radio in my 250SE. I’m really happy with it, it worked really well on my recent drive down to Canberra. One of the only things I thought could have been improved on the radio was the buttons were unlabeled. The real radios had LMKUU buttons. Classic Auto Sound, who build these...
It was just announced that the NSW 60 day logbook ‘trial’ has been made permanent. This is great news as its a really good system. The two minor drawbacks – the amount of paperwork and the size of the plates. The plates are tiny and really ugly. They are so small that they don’t line up with the mounting holes of nearly any car. ...
The Retrosound Model 2 radio in my Citroen DS has been playing up. It would randomly adjust the volume on its own, mostly down. The practical effect of this was not being able to listen to the radio. A while back I removed the face of the radio to take a look and the wire from the volume knob to the radio looked chafed. ...
This weekend I traveled to Canberra for 2019 ACT German Car Show. I’ve been to this show a few times before (2013, 2015, 2017), but this is the first time I have formally entered a car. In prior years I have driven down on the day and arrived around 11ish to see the show for an hour or so. This year I decided...
Yesterday I attended the 2019 British Car Show at the Kings School. This is still, in my opinion, the premier car show in Sydney each year. It was a lovely day, with summer like weather and a big turn out of cars. I didn’t display a car this year. Last year, I displayed my E-Type. However, the Jaguars now come in a different...
One of the things I noticed when I first changed the oil on my 560SEC was the dent in the lower oil pan. Presumably it hit a curb or rock at some point. It was also leaking. the dent was likely too small to interfere with the oil pump, or oil pickup but I wanted to be sure. The M117 lower oil pan...
Today I completed the install of the Classic Auto Sound Becker Tribute. In the first part, I removed the old Clarion, and installed the the Retrosound wiring harness. I also tested the radio and it was working fine. The new radio looks great and is a huge improvement over the Clarion CD player. Installation Step 4: Convert the Becker Tribute radio to DIN At...
I have been wanting to change the radio in the 250SE since I have owned the car. It was a basic Clarion unit that looked totally out of place. The dashboard in my car has been cut to DIN size, meaning going back to the original Becker wasn’t really an option. Unfortunately many W111’s had their dashboards cut up in the 70s...
I installed a double four post hoist late last year. Overall, I have been happy with the hoist. It is a very tight fit in my space, but it is worth being able to store cars more effectively. It also allows me to rent out a couple of spots to help cover my costs. The major problem I have is oil drippage from the...
The Mercedes-Benz E Class wagon is not particularly common. It would appear that most buyers opted for the ML/GLE model. Their loss as I believe the S211 is the far better car, unless you want to tow. This makes spare parts a bit more tricky, when those parts are not shared with the sedan. In this case, the tail light lens was broken...
More Posts
